Durabond is a cementitious, polymer modified tile adhesive. It contains highest grades of cement, fillers, polymers and chemical additives to give it unique properties.
Uses
Durabond is suitable for fixing :
- Wall and floor tiles
- Ceramic and Mosaic tiles
- Granite tiles
- Percelain tiles
Advantages
- Excellent work abilities (open time)
- Easy to use at sight
- High bond strength
- Can be applied directly on cement screeds, concrete or lime mortars
- Suitable for indoors and outdoor application
- Non Toxic
Specifications
Nature: Cementitious powder
Colour: Gray
Density: ~1.9Kg/ltr
Open Time: Approximately 30 minutes at 25°C
Pot Life: Approximately 60 minutes at 25°C
Mixing ratio: Approximately 5-6 ltrs for 25kgs bag
Coverage : Approximately 3-4 Kg/m 2
Packaging : 25 Kg bag
Substrate preparation :
The substrate must be cured, mechanically strong, free from loose particles, grease, oils, paint, wax and be sufficiently dry.
Mixing:
Add 5-6 ltrs of clean water to suitable mixing container. Slowly add Durabond powder to water and mix until a homogeneous lump free paste is achieved.
Application
Apply Durabond at 2-3mm thickness directly to the concrete substrate using a notched trowel and spread the mortar evenly over the surface to be tiled.
