DuraCoat AquaTech Waterproofing Range

AquaTech PW 203

Duracoat Aqua tech PW 203 Integral Waterproofing Powder Admixture
Duracoat Aqua tech PW 203 Integral Waterproofing Powder Admixture

Description

DuraCoat AquaTech PW 203 is an integral waterproofing powder composed of waterproofing additives in powder form, used for waterproofing cement and concrete plaster.

Areas of Application

  • For proofing roof slabs.
  • For proofing water tanks and screed
  • For proofing external plaster.

Advantages

  • Reduces water absorption.
  • Chloride free so no chance of corrosion.
  • Effective core fillers help to fill capillaries and pores to prevent water seepage.
  • Compatible with all types and grades of cement.
  • Makes the mix cohesive and denser hence reducing permeability.

Consumption

Add 500g Duracoat AquaTech PW 203 for every 50kg of Cement.

Application Method

  • Cement to be mixed with sand in a dry state for 1-2 mins.
  • Add Duracoat AquaTech PW203 to the dry mix of cement: sand as per the mixing ratio.
  • Add potable water as per standard water: cement ration.
  • Mix evenly until a homogeneous mix is obtained.
  • Place the concrete/mortar with regular practices of water curing.

Packaging

500g Pack

Shelf life

24 months from the date of manufacture.

AquaTech LQ 202

Duracoat Aqua tech LQ 202 Integral Waterproofing Liquid Admixture
Duracoat Aqua tech LQ 202 Integral Waterproofing Liquid Admixture

Description

Duracoat AquaTech LQ 202 is a single component, chloride-free, integral waterproofing liquid admixture for concrete and mortar to minimize the shrinkage in cracks , and permeability and increase the waterproofing properties of concrete and mortar.

Areas of Application

  • Waterproofing roof slabs.
  • Water tank and Screed.
  • External Plaster.

Advantages

  • Makes the concrete/plaster watertight or impermeable.
  • Improves workability.
  • Chloride free hence does not affect reinforcement.
  • Compatible with all types of cement.
  • Makes the mix cohesive and denser.
  • Reduces shrinkage cracks.

Consumption

Add 125ml-150ml Duracoat AquaTech LQ202 for every 25kg bag of Cement.

Application Method

  1. As per the mix ratio, concrete is to be mixed in a dry state for 1-2 mins, Add 75-80% of gauging water and mix for 2-3mins.
  2. Duracoat AquaTech is to be added to the remaining gauging water as per the mixing ratio.
  3. Gauging water mixed with Duracoat AquaTech LQ202 is to be added to concrete and mixed for 2-3 mins.
  4. Place the concrete or plaster as needed.

Packaging

1L & 20L

Shelf Life

24 months from the date of manufacture.

AquaTech Bond Latex 503

Duracoat Aqua tech Bond Latex 503 SRB based Liquid for Proofing and Repairs
Duracoat Aqua tech Bond Latex 503 SRB-based Liquid for Proofing and Repairs

Description

Duracoat AquaTech Bond Latex 503 is an SBR-based liquid for high-performance application in waterproofing and repairs.

Uses

  • As a preventive waterproofing
  • Plaster to Plater
  • Concrete to concrete
  • Plaster over brick masonry
  • To repair plaster cracks
  • As a coating for the repair of rebars mixed with Cement.
Facebook Comments Box
Print Friendly, PDF & Email

You may also like...

Leave a Reply

Your email address will not be published.

Sign In

Register

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.